NEC QX-S3109TP 設定メモ - Knowlege Database

概要
- 設定の保存
設定

概要†

NEC製L2スイッチ「QX-S3109TP」の設定に関するメモ。

設定の保存†

[QX-S3109TP] save

The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait............................
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.

↑

設定†

↑

管理アドレス設定†

VLAN1へのアドレス設定。

<QX-S3109TP> sys
[QX-S3109TP] interface Vlan-interface 1
[QX-S3109TP-Vlan-interface1] ip address 172.16.3.100 255.255.0.0
[QX-S3109TP-Vlan-interface1] quit

↑

SSH設定†

SSH接続用設定。

ローカル鍵の生成

QX-S3109TP> sys
[QX-S3109TP] public-key local create rsa

ユーザの作成

[QX-S3109TP] local-user admin
[QX-S3109TP-luser-admin] password simple [PASSWORD]
[QX-S3109TP-luser-admin] authorization-attribute level 3
[QX-S3109TP-luser-admin] service-type ssh telnet terminal 
[QX-S3109TP-luser-admin] quit

SSHサービスの起動

[QX-S3109TP] ssh server enable 
[QX-S3109TP] ssh user admin service-type stelnet authentication-type password
[QX-S3109TP] user-interface vty 0 15
[QX-S3109TP-ui-vty0-15] authentication-mode scheme 
[QX-S3109TP-ui-vty0-15] user privilege level 3
[QX-S3109TP-ui-vty0-15] idle-timeout 0 0

SSHサービスの動作状況確認

[QX-S3109TP-ui-vty0-15]display ssh server status 
 SSH server: Enable
 SSH version : 1.99
 SSH authentication-timeout : 60 second(s)
 SSH server key generating interval : 0 hour(s)
 SSH authentication retries : 3 time(s)
 SFTP server: Disable
 SFTP server Idle-Timeout: 10 minute(s)

↑

SNMP設定†

SNMP有効化

[QX-S3109TP] snmp-agent sys-info version v2c
[QX-S3109TP] snmp-agent community read [COMMNITY]

SNMP設定表示

[QX-S3109TP] display snmp-agent sys-info

  The contact person for this managed node:
          NEC Corporation.

  The physical location of this node:
          asabiya.net

  SNMP version running in the system:
          SNMPv2c SNMPv3

SNMP Trap有効化

[QX-S3109TP] snmp-agent trap enable
[QX-S3109TP] enable snmp trap updown
[QX-S3109TP] snmp-agent target-host trap address udp-domain [SERVER IP] params securityname localnet v2c

SNMP Trap設定表示

[QX-S3109TP] display snmp-agent trap-list
  arp trap enable
  configuration trap enable
  default-route trap enable
  flash trap enable
  standard trap enable
  system trap enable

  Enable traps: 6; Disable traps: 0

↑

LLDP設定†

LLDP有効化

<QX-S3109TP> sys
[QX-S3109TP] lldp enable

隣接機器の表示

[QX-S3109TP] display lldp neighbor-information 

LLDP neighbor-information of port 9[GigabitEthernet1/0/9]:
  Neighbor index   : 1
  Update time      : 0 days,0 hours,1 minutes,5 seconds
  Chassis type     : MAC address
  Chassis ID       : 7486-0bc9-6a00
  Port ID type     : Interface name
  Port ID          : Gi0/1
  Port description : GigabitEthernet0/1
  System name        : Catalyst2960L-8TS-LL.asabiya.net
  System description : Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(5)E2, RELEASE SOFTWARE (fc4)
  System capabilities supported : Bridge,Router
  System capabilities enabled   : Bridge

  Management address type           : ipv4
  Management address                : 172.16.3.63
  Management address interface type : SystemPortNumber
  Management address interface ID   : 1
  Management address OID            : 0

  Port VLAN ID(PVID): 1

  Auto-negotiation supported : Yes
  Auto-negotiation enabled   : Yes
  OperMau                    : speed(1000)/duplex(Full)

↑

Syslog設定†

Syslog転送設定

[QX-S3109TP] info-center loghost [SYSLOG Server]