- 追加された行はこの色です。
- 削除された行はこの色です。
目次~
#contents
*概要 [#ub8d0195]
Alaxala AX2130SS-24THの初期設定メモ。~
*アクセス [#i13ba068]
**コンソールアクセス [#c7a2f84e]
RS-232Cにて接続を行い、ターミナルからアクセスする。~
|ユーザ|operator|
|パスワード|なし|
login: operator
Password:
No password is set. Please set password!
Copyright (c) 2017-2020 ALAXALA Networks Corporation. All rights reserved.
>
**パスワードの初期化 [#q6f33391]
ログインユーザ、enableモードのパスワードを初期化する方法。
-1. コンソール接続を行う
-2. 装置のリセットボタンを押し込み、再起動を実行
-3. loginが表示されるまで、Ctrl + Nを押下しつづける
-4. loginが表示されたら、以下にてログイン
|ユーザ|operator|
|パスワード|なし|
-5. 管理者モードに切り替え
> enable
-6. operatorパスワードを変更
# password
Changing local password for operator.
New password:
Retype new password:
-7. enableパスワードを変更
# password enable-mode
Changing local password for admin.
New password:
Retype new password:
*基本操作 [#e1d42e83]
**権限切り替え [#eb46df51]
-管理者モード
> enable
-設定モード
# configure
-インターフェイス設定
(config)# interface gigabitethernet 0/1
(config-if)#
**設定の保存 [#tae4d9f7]
未保存の設定がある場合、プロンプトに[!]が表示される。~
-未保存時
!ax2130s-24th(config)#
-保存
!ax2130s-24th(config)# save
ax2130s-24th(config)#
**再起動 [#r4925126]
# reload
*初期設定 [#t204ce25]
**管理アドレスの設定 [#id3a09c8]
-書式
(config-if)# ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
-例
# configure
(config)# interface vlan 1
!(config-if)# ip address 192.168.1.15 255.255.255.0
**タイムゾーン設定 [#l993d846]
-書式
clock timezone [TIMEZONE] [+/-UTC]
-例
# configure
(config)# clock timezone JST +9
!(config)# save
**時刻設定 [#z2ba325a]
-書式
set clock YYMMDDHHMM
-例
# set clock 2209102331
Sat Sep 10 23:31:36 JST 2022
**NTP設定 [#iee32898]
-書式
(config)# ntp client server xxx.xxx.xxx.xxx
-例
# configure
(config)# ntp client server 192.168.0.1
**時刻確認 [#b0b6d11d]
-例
# show clock
Sun Sep 11 00:47:31 JST 2022
** SSH設定 [#z1c0be70]
-SSH接続の有効化
(config)# ip ssh
(config)# line vty 0 1
(config)# save
** SNMP設定 [#j1cc2eb9]
-コミュニティ名の設定
(config)# snmp-server community [COMMUNITY] rw
-SNMPマネージャの設定(ポーリング許可とTrap送信)
(config)# snmp-server host [xxx.xxx.xxx.xxx] traps localnet version 2c
-設置場所の設定
(config)# snmp-server location [LOCATION]
-Trap送信設定(起動、設定変更、時刻変更)
(config)# snmp-server traps unlimited-coldstart-trap
-Trap送信設定(Link Status)
(config)# interface gigabitethernet #IF
(config-if)# snmp trap link-status