目次~
#contents
*概要 [#da661d89]
Cisco 892の初期設定手順。~
アドレス付与、リモート接続、SNMP有効化あたりまでをカバーする予定。~
*接続手順 [#w30b94f6]
初期接続にはコンソールケーブルが必須となる。~
シリアル接続のパラメータはteratermの初期値で対応が可能。~
~
初期起動時には以下の様な出力が行われる。~
System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
C890 platform with 524288 Kbytes of main memory
<中略>
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
対話型インターフェイスにて初期設定を行う場合は[yes]、行わない場合は[no]を入力する。~
[no]を選択した場合には以下の様な出力が行われる。~
Press RETURN to get started!
*Mar 1 00:00:05.539: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c890 Next reboot level =
advipservices and License = advipservices
*Mar 6 05:39:40.043: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 6 05:39:40.127: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized
*Mar 6 05:39:40.203: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled
*Mar 6 05:39:54.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, changed state to down
*Mar 6 05:39:54.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to down
*Mar 6 05:39:54.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state to down
*Mar 6 05:39:54.811: %LINK-3-UPDOWN: Interface FastEthernet8, changed state to up
*Mar 6 05:39:54.811: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 6 05:39:55.739: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar 6 05:39:55.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet8, changed state to down
*Mar 6 05:39:55.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 6 05:39:56.811: %LINK-3-UPDOWN: Interface FastEthernet8, changed state to down
*Mar 6 05:39:56.811: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to down
*Mar 6 05:42:24.819: %LINK-5-CHANGED: Interface BRI0, changed state to administratively down
*Mar 6 05:42:26.767: %LINK-5-CHANGED: Interface FastEthernet8, changed state to administratively down
*Mar 6 05:42:26.767: %LINK-5-CHANGED: Interface GigabitEthernet0, changed state to administratively down
*Mar 6 05:42:34.207: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.1(3)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Sun 27-Mar-11 12:57 by prod_rel_team
*Mar 6 05:42:34.207: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Mar 6 05:42:34.231: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 6 05:42:34.231: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Mar 6 05:42:36.891: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Mar 6 05:42:36.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1, changed state to down
*Mar 6 05:42:36.915: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2, changed state to down
*Mar 6 05:42:36.927: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet3, changed state to down
*Mar 6 05:42:36.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet4, changed state to down
*Mar 6 05:42:36.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet5, changed state to down
*Mar 6 05:42:36.955: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet6, changed state to down
*Mar 6 05:42:36.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet7, changed state to down
Router>
*操作手順 [#c2336ebd]
**インターフェイスの状態確認[#zad9369f]
インターフェイスの状態を表示させる。~
#show ip interface brief
Interface IP-Address OK? Method Status Protocol
BRI0 unassigned YES unset administratively down down
BRI0:1 unassigned YES unset administratively down down
BRI0:2 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
FastEthernet4 unassigned YES unset down down
FastEthernet5 unassigned YES unset down down
FastEthernet6 unassigned YES unset down down
FastEthernet7 unassigned YES unset down down
FastEthernet8 unassigned YES unset administratively down down
GigabitEthernet0 unassigned YES unset administratively down down
Vlan1 unassigned YES unset down down
**ホスト名の設定 [#w775370e]
以下の手順にてホスト名を設定する。
> en
# conf t
(config)# hostname [HOSTNAME]
(config)# exit
# writemem
**インターフェイスへのアドレス付与 [#o43c4877]
WAN(GigabitEthernet0)に192.168.1.252/24を付与する手順。~
> en
# conf t
(config)#interface gigabitEthernet 0
(config-if)#ip address 192.168.1.252 255.255.255.0
(config-if)#no shutdown
(config)# exit
# write mem
インターフェイスの状態を確認する。~
#show ip interface brief
Interface IP-Address OK? Method Status Protocol
BRI0 unassigned YES unset administratively down down
BRI0:1 unassigned YES unset administratively down down
BRI0:2 unassigned YES unset administratively down down
FastEthernet0 unassigned YES unset down down
FastEthernet1 unassigned YES unset down down
FastEthernet2 unassigned YES unset down down
FastEthernet3 unassigned YES unset down down
FastEthernet4 unassigned YES unset down down
FastEthernet5 unassigned YES unset down down
FastEthernet6 unassigned YES unset down down
FastEthernet7 unassigned YES unset down down
FastEthernet8 unassigned YES unset administratively down down
GigabitEthernet0 192.168.1.252 YES manual up up
Vlan1 unassigned YES unset down down
** ゲートウェイ設定 [#s9643f4c]
** DNS設定 [#a10b54c7]
** telnetの有効化 [#m5223f72]
telnet接続を有効化とログインパスワードの設定。（例では「cisoc」に設定）~
> en
# conf t
(config)#line vty 0 4
(config-line)#transport input telnet
(config-line)#password cisco
(config)# exit
# write mem
** enableモードパスワードの設定 [#u2efaf4b]
enableモードに切り替える際のパスワードを設定する。（例では「cisoc」に設定）~
> en
# conf t
(config)#enable password cisco
(config)# exit
# write mem
** 時刻同期設定 [#yd061d56]
** SNMP有効化 [#acb31c5e]
** Syslog転送設定 [#t96412a9]
** LLDP有効化 [#t967064d]
