NEC QX-S3218TP 設定メモ のバックアップ(No.2)
- バックアップ一覧
- 差分 を表示
- 現在との差分 を表示
- ソース を表示
- NEC QX-S3218TP 設定メモ へ行く。
- 1 (2017-06-25 (日) 18:19:27)
- 2 (2017-06-25 (日) 20:45:07)
- 3 (2017-06-26 (月) 01:16:15)
- 4 (2017-10-01 (日) 01:14:45)
- 5 (2017-10-01 (日) 17:56:55)
目次
概要 †
NEC製L2スイッチ「QX-S3218TP」の設定に関するメモ。
制御 †
コンソール接続 †
コンソールケーブル †
機器の基礎設定にはコンソールケーブルが必要となる。
ケーブル仕様はCisco製品向けのコンソールケーブルと同じであるため、代用が可能。
(以下の製品にて動作を確認)
- FTDI chipset USB RJ45 コンソールケーブル
接続仕様 †
シリアルコンソールの仕様は以下にて接続。
ターミナル | VT100 |
速度 | 9600 bps |
データ | 8 bit |
パリティ | none |
ストップ | 1 bit |
フロー制御 | none |
初期状態ではパスワードの設定は入れられていない。
起動 †
コンソールケーブルを接続し、電源を投入すると以下の様なメッセージが表示される。
- 起動時
Starting...... *********************************************************** * * * NEC QX-S3218TP BOOTROM, Version 518 * * * *********************************************************** Copyright(C) 2004-2008. All rights reserved. Creation date : Jan 16 2008, 15:53:06 CPU Clock Speed : 200MHz BUS Clock Speed : 33MHz Memory Size : 64MB Mac Address : 000fe2xxxxxx Press Ctrl-B to enter Boot Menu...
- ブートメニュー
この段階で「Ctrl + B」を押下すると、ブートメニューに入る。
初期状態ではパスワードは未設定のため、[Enter]を押下する。
Press Ctrl-B to enter Boot Menu... 1 password: BOOT MENU 1. Download application file to flash 2. Select application file to boot 3. Display all files in flash 4. Delete file from flash 5. Modify bootrom password 6. Enter bootrom upgrade menu 7. Skip current configuration file 8. Set bootrom password recovery 9. Set switch startup mode 0. Reboot Enter your choice(0-9):
- ログイン
タイムアウトすると通常のコンソールモードで起動する。
Press Ctrl-B to enter Boot Menu... 0 Auto-booting... Decompress Image....OK! Starting at 0x80100000... User interface aux0 is available. Press ENTER to get started.
[Enter]を押下
- パスワードが設定されていない場合(初期状態)
%Apr 1 23:56:06:068 2000 QX-S3218TP SHELL/5/LOGIN:- 1 - Console(aux0) in unit1 login <QX-S3218TP>
- パスワードが設定されている場合
Login authentication Password:
再起動 †
コマンドラインからの再起動
- reboot
<QX-S3218TP> reboot Start to check configuration with next startup configuration file, please wait...... This command will reboot the device. Current configuration will be lost in next startup if you continue. Continue? [Y/N] Y This will reboot device. Continue? [Y/N] Y #Apr 1 23:56:53:947 2000 QX-S3218TP COMMONSY/5/REBOOT:- 1 - Reboot device by command. <QX-S3218TP> %Apr 1 23:56:57:934 2000 QX-S3218TP DEV/5/DEV_LOG:- 1 - Switch is rebooting...
設定ファイル操作 †
概要 †
機器のメモリ内に設定ファイルを複数保持することが出来る。
操作 †
ファイルの確認 †
dirコマンドでメモリ内のファイルを確認できる。
(*)が付いているファイルが現在使用されているファイルとなる。
- dir /all
<qx>dir /all Directory of unit1>flash:/ 1 (*) -rw- 3721202 Feb 18 2008 16:13:04 qx-s3200-v313.bin 2 (*) -rw- 576644 Jan 01 2004 00:00:00 qx-http3.1.8-0036.web 3 -rw- 1010 Jan 01 2004 00:00:00 vrpcfg.def 4 (*) -rw- 2594 Apr 02 2000 00:43:24 vrpcfg.cfg 5 -rwh 151 Apr 02 2000 17:36:43 private-data.txt 6 -rw- 1010 Apr 02 2000 00:44:59 startup.cfg
設定ファイルの選択 †
起動時に使用する設定ファイルを変更する場合には以下の様なコマンドを使用する。
- 書式
startup saved-configuration [FILENAME]
- 例
- 状態の確認
<qx>display startup UNIT1: Current Startup saved-configuration file: flash:/vrpcfg.cfg Next main startup saved-configuration file: flash:/vrpcfg.cfg Next backup startup saved-configuration file: NULL Bootrom-access enable state: enabled
- 設定ファイルの変更
<qx>startup saved-configuration startup.cfg Please wait.............Done! %Apr 2 00:48:19:294 2000 qx CFM/3/CFM_LOG:- 1 -Unit1 set the configuration successfully.
- 変更結果の確認
<qx>display startup UNIT1: Current Startup saved-configuration file: flash:/vrpcfg.cfg Next main startup saved-configuration file: flash:/startup.cfg Next backup startup saved-configuration file: NULL Bootrom-access enable state: enabled
- 状態の確認
コマンド †
概要 †
QX-S3218TPはH3C社のOEM製品であるため、コマンド体系はH3C系機器と同一である。
基本操作 †
モード切替 †
- user-viewモード
<xxx-xxx>
- system-viewモード
<xxx-xxx> system-view [xxx-xxx]
又は、
<xxx-xxx> sys [xxx-xxx]
バージョン情報の表示 †
- display version
<QX-S3218TP>display version Versatile Routing Platform Software VRP(R) Software, Version 3.1.3 Copyright (c) 2004-2008 NEC Corporation. All rights reserved. QX-S3218TP uptime is 0 week, 0 day, 0 hour, 2 minutes QX-S3218TP with 1 Processor 64M bytes SDRAM 8M bytes Flash Memory Config Register points to FLASH Hardware Version is REV.A Bootrom Version is 518 CPLD Version is 003 [Subslot 0] 16FE Hardware Version is REV.A [Subslot 1] 1GE Hardware Version is REV.A [Subslot 2] 1GE Hardware Version is REV.A
設定の表示 †
- display current-configuration
<QX-S3218TP>display current-configuration # sysname QX-S3218TP # radius scheme system # domain system # vlan 1 # interface Aux1/0/0 # interface Ethernet1/0/1 # interface Ethernet1/0/2 # interface Ethernet1/0/3 # interface Ethernet1/0/4 # interface Ethernet1/0/5 # interface Ethernet1/0/6 # interface Ethernet1/0/7 # interface Ethernet1/0/8 # interface Ethernet1/0/9 # interface Ethernet1/0/10 # interface Ethernet1/0/11 # interface Ethernet1/0/12 # interface Ethernet1/0/13 # interface Ethernet1/0/14 # interface Ethernet1/0/15 # interface Ethernet1/0/16 # interface GigabitEthernet1/1/1 # interface GigabitEthernet1/1/2 shutdown # interface GigabitEthernet1/2/1 # interface GigabitEthernet1/2/2 shutdown # interface NULL0 # user-interface aux 0 user-interface vty 0 4 # return
ヘルプ †
モードにより使用できるコマンドが変化する。
各モードで使用可能なコマンドは「?」を入力することで表示される。
- user-viewモード
<xxx-xxx> ? User view commands: boot Set boot option cd Change current directory clock Specify the system clock cluster Run cluster command copy Copy from one file to another debugging Enable system debugging functions delete Delete a file dir List files on a file system display Display current system information fixdisk Recover lost chains in storage device format Format the device free Clear user terminal interface ftp Open FTP connection lock Lock current user terminal interface mkdir Create a new directory more Display the contents of a file move Move a file nslookup Query Internet name servers ntdp Run NTDP commands ping Ping function pwd Display current working directory quit Exit from current command view reboot Reset switch rename Rename a file or directory reset Reset operation rmdir Remove an existing directory save Save current configuration schedule Schedule system task send Send information to other user terminal interfaces stacking Run command on stack switch startup Specify system startup parameters super Set the current user priority level system-view Enter the System View telnet Establish one TELNET connection terminal Set the terminal line characteristics tftp Open TFTP connection tracemac Trace MAC function tracert Trace route function undelete Recover a deleted file undo Cancel current setting xmodem Establish an xmodem connection
- system-viewモード
[xxx-xxx] ? System view commands: acl Specify acl configuration information am Access management apply Apply qos-profile arp Add static ARP entry bpdu-tunnel Global Enable tunneling protocol frame broadcast-suppression Specify the broadcast storm control burst-mode Specify burst-mode cdp CDP Neighbor discovery protocol cluster Specify cluster configuration information command-privilege Specify the command level copy Copy source port configuration to destination port copyright-info Displaying copyright information cut Cut connection delete Delete route information dhcp DHCP packet rate limit dhcp-snooping DHCP snooping display Display current system information dldp Specify configuration information of DLDP dns Specify domain name system domain Add domain or modify domain attributes dot1x Specify 802.1X configuration information end-station Configure ip address of end station execute Batch Command file Specify file system configuration information ftp Specify FTP server configuration information garp Generic Attribute Registration Protocol gratuitous-arp-learning Gratuitous Arp learning function gvrp GARP VLAN Registration Protocol habp Specify HABP configuration information header Specify the login banner hwping Specify HWPing test class hwping-agent Specify HWPing agent task function hwping-server Specify HWPing server task function hwtacacs Specify HWTACACS server icmp Specify ICMP(the Internet Control Message Protocol) configuration information igmp-snooping IGMP snooping info-center Specify information center configuration information interface Specify the interface configuration view ip Specify IP(Internet Protocol) configuration information ipv6 Specify IPv6(Internet Protocol Version 6) configuration information lacp Configure LACP Protocol link-aggregation Configure a link aggregation group local-server Specify local RADIUS server configuration information local-user Specify local user configuration information loopback-detection Detect if loopback exists mac-address Configure MAC address mac-authentication Specify MAC authentication configuration information management-vlan Specify management-vlan mirrored-to Mirror the packets mirroring-group Specify mirroring-group monitor-link Configure Monitor Link multicast-source-deny Multicast source port deny ndp Neighbor discovery protocol nslookup Query Internet name servers ntdp Specify NTDP configuration information ntp-service Specify NTP(Network Time Protocol) configuration information oadp OADP Neighbor discovery protocol packet-filter Filter packets based on acl ping Ping function port-group All ports which belong to a certain port-group port-mac Config port MAC start address port-security Specify port-security configuration information priority Specify priority priority-trust Specify priority trust mode public-key Specify public-key module configuration information qos QoS configuration information qos-profile Specify qos-profile configuration information queue-scheduler Specify queue scheduling mode and parameters quit Exit from current command view radius Specify RADIUS configuration information reset Reset operation return Exit to User View rmon Specify RMON rsa Specify RSA module configuration information save Save current configuration schedule Schedule system task sftp Set SFTP service attribute smart-link Configure Smart Link smarton SmartOn enable function snmp-agent Specify SNMP(Simple Network Management Protocol) configuration information ssh Specify SSH (secure shell) configuration information ssh2 Open a secure shell client connection stacking Specify stack configuration information stp Spanning tree protocol super Modify super password parameters sysname Specify system name and the command line prompt system-guard System-guard module options system-monitor Specify system-monitor configuration information tcp Specify TCP(Transmission Control Protocol) configuration information tftp Open TFTP connection tftp-server TFTP Server time-range Specify time-range configuration information tracemac Trace MAC function tracert Trace route function traffic-limit Limit the rate of the packets traffic-priority Specify new priority of the packets traffic-redirect Redirect the packets traffic-statistic Count the packets undo Cancel current setting unknown-multicast Unknown multicast user-interface Configure the user terminal interface vlan Configure VLAN vlan-mapping Specify VLAN mapping function vlan-vpn Specify VLAN VPN (Virtual Private Net) information voice Specify voice vlan