Vyatta 初期設定 のバックアップ(No.2)
- バックアップ一覧
- 差分 を表示
- 現在との差分 を表示
- ソース を表示
- Vyatta 初期設定 へ行く。
目次
インターフェイスへのIPアドレス設定 †
- 書式
set interfaces ethernet [Interface] address [IP Address]/[bit]
- eth0に192.168.1.253/24を設定
$ configure [edit] # set interfaces ethernet eth0 address 192.168.1.253/24 [edit] # commit [edit] # save
- eth1に192.168.10.253/24を設定
$ configure [edit] # set interfaces ethernet eth1 address 192.168.10.253/24 [edit] # commit [edit] # save
Web管理画面の有効化 †
- 書式
set service https
- 管理画面サービスを有効化する
$ configure [edit] # set service https [edit] # commit
- Webサーバが起動
Stopping web server: lighttpd. Starting web server: lighttpd. Stopping PAGER server Starting PAGER server [edit]
- 設定を保存
# save Saving configuration to '/opt/vyatta/etc/config/config.boot'... Done [edit]
アカウントのパスワード変更 †
- 書式
set system login user [USER] authentication plaintext-password [PASSWORD]
- 初期アカウント（vyatta）のパスワードを変更（hogehogeに変更）
# set system login user vyatta authentication plaintext-password hogehoge [edit] # commit [edit]
DNSの設定 †
- 書式
set system name-server [DNS Server Address]
- DNSサーバ（192.168.1.250）を設定
# set system name-server 192.168.1.250 [edit] # commit
デフォルトゲートウェイの設定 †
- 書式
set system gateway-address [Default Gateway Address]
# set system gateway-address 192.168.1.254 [edit] # commit [edit]
SSHの有効化 †
- 書式
set service ssh
# set service ssh [edit] # commit [edit]
DHCPの有効化 †
- 書式
set service dhcp-server shared-network-name ETH1_POOL subnet [Network Address]/[bit] start [Start IP Address] stop [End IP Address]
set service dhcp-server shared-network-name ETH1_POOL subnet [Network Address]/[bit] default-router [Default Gateway Address]
set service dhcp-server shared-network-name ETH1_POOL subnet [Network Address]/[bit] dns-server [DNS Address]
# set service dhcp-server shared-network-name ETH1_POOL subnet 192.168.10.0/24 start 192.168.10.100 stop 192.168.10.128 [edit] # set service dhcp-server shared-network-name ETH1_POOL subnet 192.168.10.0/24 default-router 192.168.10.253 [edit] # set service dhcp-server shared-network-name ETH1_POOL subnet 192.168.10.0/24 dns-server 192.168.10.253 [edit] # commit [edit]
NAT設定 †
- 書式
set service nat rule 1 source address [Network Address]/[bit]
set service nat rule 1 outbound-interface [Interface]
set service nat rule 1 type masquerade
- eth1(192.168.10.0/24)からの通信は全てeth0(192.168.1.253)でNATする
# set service nat rule 1 source address 192.168.10.0/24 [edit] # set service nat rule 1 outbound-interface eth0 [edit] # set service nat rule 1 type masquerade [edit] # commit [edit]
