IBM UltraSCSIカード ドライバ導入
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
開始行:
**Adaptec Ultra160/Ultra320 SCSI Controller - aic7xxx.ko/...
テープ装置などを接続する際に使用するSCSIアダプタはAdaptec...
システムガイド上ではServeRAIDアダプタ経由でのテープ装置の...
Ultra320SCSIアダプタ使用時は手順のaic7xxxをaic79xxに読み...
1. /etc/modprobe.confを編集します。
# vi /etc/modprobe.conf
alias scsi_hostadapter aic7xxx <= この行を追加します
options scsi_mod max_luns=255 <= この行を追加します
2. 既存のinitrdイメージのバックアップを取得し、新しいinit...
# cd /boot
# mv initrd-2.6.9-11.ELsmp.img initrd-2.6.9-11.ELsmp.img...
# mkinitrd –v /boot/initrd-2.6.9-11.ELsmp.img 2.6....
mkinitrdコマンドに-vオプションをつけることで、initrdイメ...
# mkinitrd -v /boot/initrd-2.6.9-11.ELsmp.img 2.6.9-11.E...
modules: ./kernel/drivers/scsi/aic7xxx/aic79xx.ko
〜中略〜
/lib/modules/2.6.9-11.ELsmp/./kernel/drivers/scsi/aic7xx...
/tmp/initrd.Y13010/lib/aic79xx.ko(elf32-i386) へコピー...
〜中略〜
Loading module scsi_mod with options max_luns=255
Loading module aic79xx
3. aic7xxx.koを含んだinitrdモジュールを作成後にシステムを...
# shutdown –r now
4. 再起動後、テープ装置が認識されているかどうかを確認しま...
オートローダーの場合は、ドライブ部とチェンジャー部が別の...
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: IBM Model: ULTRIUM-TD2 Rev: 4770
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 05 Lun: 01
Vendor: IBM Model: 36232LX Rev: 1.80
Type: Medium Changer ANSI SCSI revision: 02
5. テープ装置を認識できればstドライバがロードされているこ...
6. /proc/scsi/scsiでテープ装置を認識しているにもかかわら...
※ xSeriesオプション製品のテープ装置を使用する場合は上記の...
ftp://ftp.software.ibm.com/storage/devdrvr/Linux/ ~
ただし、NetVaultなどの商用バックアップユーティリティ(Tiv...
43
終了行:
**Adaptec Ultra160/Ultra320 SCSI Controller - aic7xxx.ko/...
テープ装置などを接続する際に使用するSCSIアダプタはAdaptec...
システムガイド上ではServeRAIDアダプタ経由でのテープ装置の...
Ultra320SCSIアダプタ使用時は手順のaic7xxxをaic79xxに読み...
1. /etc/modprobe.confを編集します。
# vi /etc/modprobe.conf
alias scsi_hostadapter aic7xxx <= この行を追加します
options scsi_mod max_luns=255 <= この行を追加します
2. 既存のinitrdイメージのバックアップを取得し、新しいinit...
# cd /boot
# mv initrd-2.6.9-11.ELsmp.img initrd-2.6.9-11.ELsmp.img...
# mkinitrd –v /boot/initrd-2.6.9-11.ELsmp.img 2.6....
mkinitrdコマンドに-vオプションをつけることで、initrdイメ...
# mkinitrd -v /boot/initrd-2.6.9-11.ELsmp.img 2.6.9-11.E...
modules: ./kernel/drivers/scsi/aic7xxx/aic79xx.ko
〜中略〜
/lib/modules/2.6.9-11.ELsmp/./kernel/drivers/scsi/aic7xx...
/tmp/initrd.Y13010/lib/aic79xx.ko(elf32-i386) へコピー...
〜中略〜
Loading module scsi_mod with options max_luns=255
Loading module aic79xx
3. aic7xxx.koを含んだinitrdモジュールを作成後にシステムを...
# shutdown –r now
4. 再起動後、テープ装置が認識されているかどうかを確認しま...
オートローダーの場合は、ドライブ部とチェンジャー部が別の...
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: IBM Model: ULTRIUM-TD2 Rev: 4770
Type: Sequential-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 05 Lun: 01
Vendor: IBM Model: 36232LX Rev: 1.80
Type: Medium Changer ANSI SCSI revision: 02
5. テープ装置を認識できればstドライバがロードされているこ...
6. /proc/scsi/scsiでテープ装置を認識しているにもかかわら...
※ xSeriesオプション製品のテープ装置を使用する場合は上記の...
ftp://ftp.software.ibm.com/storage/devdrvr/Linux/ ~
ただし、NetVaultなどの商用バックアップユーティリティ(Tiv...
43
ページ名: