BROCADE LLDP使用方法 - Knowlege Database

概要
- 対象機器
設定手順

概要†

BROCADE製品のLLDP使用手順。

対象機器†

本手順を確認した機種一覧。

Model	SW Version	SW Image
ICX6450-C12-PD	Version:10.1.05T310 (kxz10105)	Version 08.0.30jT313

↑

設定手順†

↑

LLDPの有効化†

# conf t 
(config)# lldp run

↑

ポート毎の有効化†

# lldp enable ports ethernet 1/1/1 to 1/1/12

↑

広告情報の設定†

設定が可能な項目

 link-aggregation        Advertise 802.3 link aggregation information
 mac-phy-config-status   Advertise 802.3 MAC/PHY configuration/status
 management-address      Advertise a management address
 max-frame-size          Advertise 802.3 maximum frame size
 med-capabilities        Advertise LLDP-MED capabilities
 med-location-id         Advertise LLDP-MED location id information
 med-network-policy      Advertise LLDP-MED network policy information
 med-power-via-mdi       Advertise LLDP-MED power-via-MDI information
 port-description        Advertise port description
 port-vlan-id            Advertise 802.1 port untagged VLAN id (PVID)
 power-via-mdi           Advertise 802.3 power-via-MDI information
 system-capabilities     Advertise system capabilities
 system-description      Advertise system description
 system-name             Advertise system name
 vlan-name               Advertise 802.1 VLAN name

設定

# lldp advertise link-aggregation ports all
# lldp advertise mac-phy-config-status ports all
# lldp advertise management-address ipv4 172.16.3.161 ports all
# lldp advertise max-frame-size ports all
# lldp advertise med-capabilities ports all
# lldp advertise med-location-id ports all
# lldp advertise med-network-policy ports all
# lldp advertise med-power-via-mdi ports all
# lldp advertise port-description ports all
# lldp advertise port-vlan-id ports all
# lldp advertise power-via-mdi ports all
# lldp advertise system-capabilities ports all
# lldp advertise system-description ports all
# lldp advertise system-name ports all
# lldp advertise vlan-name vlan 100 ports all

↑

確認手順†

# show lldp neighbors

Lcl Port Chassis ID      Port ID         Port Description            System Name   
1/1/10   001a.eb96.61f2  port1.0.2       port1.0.2                   AT-x230-18GP

# show lldp neighbors detail

Local port: 1/1/10
 Neighbor: 021a.eb96.61f2, TTL 105 seconds
   + Chassis ID (MAC address): 001a.eb96.61f2
   + Port ID (interface name): "port1.0.2"
   + Time to live: 120 seconds
   + Port description    : "port1.0.2"
   + System name         : "AT-x230-18GP"
   + System description  : "Allied Telesis router/switch, Software (AlliedWar\
                            e Plus) Version 5.5.5-0.2"
   + System capabilities : bridge, router
     Enabled capabilities: bridge
   + Management address (MAC address): 001a.eb96.61f2
   + Unknown Organizationally-Specific TLV: OUI E01AEA, subtype 2
     Value: (binary) "c2ff5507e53b4961ad6d23812d7c088d"
   + Port VLAN ID: 100
   + Port-Protocol VLAN ID: supported, but disabled
   + VLAN name (VLAN 100): "DEV"
   + Protocol ID: (binary) "9000"
   + Protocol ID: (binary) "0026424203000000"
   + Protocol ID: (binary) "0027424203000002"
   + Protocol ID: (binary) "0069424203000003"
   + Protocol ID: (binary) "888e01"
   + Protocol ID: (binary) "aaaa0300e02b00bb"
   + Protocol ID: (binary) "88090101"                            
   + Protocol ID: (binary) "00540000e302"
   + Protocol ID: (binary) "0800"
   + Protocol ID: (binary) "0806"
   + Protocol ID: (binary) "86dd"
   + Protocol ID: (binary) "89020001"
   + Protocol ID: (binary) "89020128"
   + 802.3 MAC/PHY          : auto-negotiation enabled
     Advertised capabilities: 10BaseT-HD, 10BaseT-FD, 100BaseTX-HD,
                              100BaseTX-FD, 1000BaseT-FD
     Operational MAU type   : 1000BaseT-FD
   + 802.3 Power via MDI: PSE port, power enabled, class 4
     Power Pair         : A (not controllable)
     Power Type     : Type 2 PSE device
     Power Source   : Primary Power Source
     Power Priority : Low (3)
     Power Requested: Unrecognized value (0)
     Power Allocated: Unrecognized value (0)
   + Link aggregation: capable, but not aggregated
   + Maximum frame size: 1500 octets