3Ware Disk Management (tw_cli) のバックアップ(No.5)
- バックアップ一覧
- 差分 を表示
- 現在との差分 を表示
- ソース を表示
- 3Ware Disk Management (tw_cli) へ行く。
- 1 (2013-03-31 (日) 23:01:29)
- 2 (2013-03-31 (日) 23:10:59)
- 3 (2013-04-02 (火) 00:11:58)
- 4 (2013-04-22 (月) 23:58:21)
- 5 (2013-05-10 (金) 10:18:01)
- 6 (2013-07-21 (日) 15:42:18)
- 7 (2014-03-16 (日) 12:53:17)
- 8 (2015-05-05 (火) 14:56:51)
- 9 (2015-07-06 (月) 20:51:41)
- 10 (2015-11-22 (日) 15:36:22)
- 11 (2016-12-23 (金) 22:40:02)
- 12 (2017-05-11 (木) 00:23:33)
- 13 (2020-03-17 (火) 02:40:52)
- 14 (2020-04-23 (木) 21:50:06)
- 15 (2021-01-10 (日) 00:49:21)
目次
情報表示 †
info †
システム全体の情報表示 †
複数のコントローラが存在する場合も全て表示される
# tw_cli info Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU ------------------------------------------------------------------------ c7 9690SA-8I 7 7 1 1 1 1 - c8 9650SE-4LPML 4 4 1 0 1 1 -
コントローラの情報表示 †
# tw_cli info c7 Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 REBUILDING 31% - 64K 2095.44 ON ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - Hitachi HTS727575A9 p1 OK u0 698.63 GB SATA 4 - Hitachi HTS727575A9 p2 OK u0 698.63 GB SATA 1 - Hitachi HTS727575A9 p3 OK u0 698.63 GB SATA 2 - Hitachi HTS727575A9 p4 OK u0 698.63 GB SATA 3 - Hitachi HTS727575A9 p5 DEGRADED u0 698.63 GB SATA 5 - Hitachi HTS727575A9 p6 OK u? 698.63 GB SATA 6 - Hitachi HTS727575A9
ユニットの情報表示 †
# tw_cli info c7 u0 Unit UnitType Status %RCmpl %V/I/M VPort Stripe Size(GB) ------------------------------------------------------------------------ u0 RAID-10 REBUILDING 31% - - 64K 2095.44 u0-0 RAID-1 INITIALIZING 36% - - - - u0-0-0 DISK OK - - p0 - 698.481 u0-0-1 DISK OK - - p1 - 698.481 u0-1 RAID-1 REBUILDING 34% - - - - u0-1-0 DISK DEGRADED - - p5 - 698.481 u0-1-1 DISK OK - - p2 - 698.481 u0-2 RAID-1 INITIALIZING 25% - - - - u0-2-0 DISK OK - - p3 - 698.481 u0-2-1 DISK OK - - p4 - 698.481 u0/v0 Volume - - - - - 2095.44
show †
全ての情報を表示 †
# tw_cli /c7 show all /c7 Driver Version = 2.27.08.036 /c7 Model = 9690SA-8I /c7 Available Memory = 448MB /c7 Firmware Version = FH9X 4.04.00.016 /c7 Bios Version = BE9X 4.04.00.003 /c7 Boot Loader Version = BL9X 3.08.00.001 /c7 Serial Number = ********** /c7 PCB Version = Rev 041 /c7 PCHIP Version = 2.00 /c7 ACHIP Version = 1501290D /c7 Controller Phys = 8 /c7 Connections = 7 of 128 /c7 Drives = 7 of 128 /c7 Units = 1 of 128 /c7 Active Drives = 6 of 128 /c7 Active Units = 1 of 32 /c7 Max Drives Per Unit = 32 /c7 Total Optimal Units = 0 /c7 Not Optimal Units = 1 /c7 Disk Spinup Policy = 1 /c7 Spinup Stagger Time Policy (sec) = 1 /c7 Auto-Carving Policy = off /c7 Auto-Carving Size = 2048 GB /c7 Auto-Rebuild Policy = on /c7 Rebuild Rate = 1 /c7 Verify Rate = 1 /c7 Controller Bus Type = PCIe /c7 Controller Bus Width = 8 lanes /c7 Controller Bus Speed = 2.5 Gbps/lane Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 REBUILDING 32% - 64K 2095.44 ON ON VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - Hitachi HTS727575A9 p1 OK u0 698.63 GB SATA 4 - Hitachi HTS727575A9 p2 OK u0 698.63 GB SATA 1 - Hitachi HTS727575A9 p3 OK u0 698.63 GB SATA 2 - Hitachi HTS727575A9 p4 OK u0 698.63 GB SATA 3 - Hitachi HTS727575A9 p5 DEGRADED u0 698.63 GB SATA 5 - Hitachi HTS727575A9 p6 OK u? 698.63 GB SATA 6 - Hitachi HTS727575A9
設定 †
アレイ管理 †
シングルドライブの作成 †
- 書式
[コントローラ番号] add type=single disk=[ディスク番号] name=[アレイ名]
- 入力例
# tw_cli > /c5 add type=single disk=0 name=SINGLE01 Creating new unit on controller /c5 ... Done. The new unit is /c5/u1. Naming unit /c5/u1 to [SINGLE01] ... Done. Setting default Storsave policy to [balance] for the new unit ... Done. Setting default Command Queuing policy for unit /c5/u1 to [on] ... Done. Setting write cache = ON for the new unit ... Done. Warning: You do not have a battery backup unit for /c5/u1 and the enabled write cache (default) may cause data loss in the event of power failure.
スペアディスクの設定 †
- 書式
[コントローラ番号] add type=spare disk=[ディスク番号]
- 入力例（コントローラ7にディスク7をスペアとして設定）
# tw_cli > /c7 add type=spare disk=7 Creating new unit on controller /c7 ... Done. The new unit is /c7/u1. WARNING: This Spare unit may replace failed drive of same interface type only.
- 結果確認
> /c7 show Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-10 OK - - 64K 2095.44 ON ON u1 SPARE OK - - - 698.629 - OFF VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 698.63 GB SATA 0 - Hitachi HTS727575A9 p1 OK u0 698.63 GB SATA 4 - Hitachi HTS727575A9 p2 OK u0 698.63 GB SATA 1 - Hitachi HTS727575A9 p3 OK u0 698.63 GB SATA 2 - Hitachi HTS727575A9 p4 OK u0 698.63 GB SATA 3 - Hitachi HTS727575A9 p5 OK u0 698.63 GB SATA 5 - Hitachi HTS727575A9 p7 OK u1 698.63 GB SATA 6 - Hitachi HTS727575A9
リビルドの実行 †
- 書式
[コントローラ番号] start rebuild disk=[ディスク番号]
- 入力例（コントローラ5にディスク0をユニット0に追加してリビルド）
# tw_cli > /c5/u0 start rebuild disk=0 Sending rebuild start request to /c5/u0 on 1 disk(s) [0] ... Done.
ディスク管理 †
ディスクの取り外し †
- 書式
/[コントローラ番号]/[ディスク番号] remove
- 入力例
# tw_cli > /c7/p6 remove Removing /c7/p6 will take the disk offline. Do you want to continue ? Y|N [N]: y Removing port /c7/p6 ... Done.
ドライブの検出 †
接続したHDDを検出する際の操作。
- 書式
/[コントローラ番号] rescan
- 入力例
# tw_cli >/c5 rescan Rescanning controller /c5 for units and drives ...Done. Found the following unit(s): [none]. Found the following drive(s): [none].
