- 追加された行はこの色です。
- 削除された行はこの色です。
目次~
#contents
*情報表示 [#p8ee50e8]
**info [#p56d3c43]
***システム全体の情報表示[#y1d8af86]
複数のコントローラが存在する場合も全て表示される
# tw_cli info
Ctl Model (V)Ports Drives Units NotOpt RRate VRate BBU
------------------------------------------------------------------------
c7 9690SA-8I 7 7 1 1 1 1 -
c8 9650SE-4LPML 4 4 1 0 1 1 -
***コントローラの情報表示[#x42ee90e]
# tw_cli info c7
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-10 REBUILDING 31% - 64K 2095.44 ON ON
VPort Status Unit Size Type Phy Encl-Slot Model
------------------------------------------------------------------------------
p0 OK u0 698.63 GB SATA 0 - Hitachi HTS727575A9
p1 OK u0 698.63 GB SATA 4 - Hitachi HTS727575A9
p2 OK u0 698.63 GB SATA 1 - Hitachi HTS727575A9
p3 OK u0 698.63 GB SATA 2 - Hitachi HTS727575A9
p4 OK u0 698.63 GB SATA 3 - Hitachi HTS727575A9
p5 DEGRADED u0 698.63 GB SATA 5 - Hitachi HTS727575A9
p6 OK u? 698.63 GB SATA 6 - Hitachi HTS727575A9
***ユニットの情報表示[#k2d19833]
# tw_cli info c7 u0
Unit UnitType Status %RCmpl %V/I/M VPort Stripe Size(GB)
------------------------------------------------------------------------
u0 RAID-10 REBUILDING 31% - - 64K 2095.44
u0-0 RAID-1 INITIALIZING 36% - - - -
u0-0-0 DISK OK - - p0 - 698.481
u0-0-1 DISK OK - - p1 - 698.481
u0-1 RAID-1 REBUILDING 34% - - - -
u0-1-0 DISK DEGRADED - - p5 - 698.481
u0-1-1 DISK OK - - p2 - 698.481
u0-2 RAID-1 INITIALIZING 25% - - - -
u0-2-0 DISK OK - - p3 - 698.481
u0-2-1 DISK OK - - p4 - 698.481
u0/v0 Volume - - - - - 2095.44
**show [#jd545b6a]
***全ての情報を表示 [#mbdba22f]
# tw_cli /c7 show all
/c7 Driver Version = 2.27.08.036
/c7 Model = 9690SA-8I
/c7 Available Memory = 448MB
/c7 Firmware Version = FH9X 4.04.00.016
/c7 Bios Version = BE9X 4.04.00.003
/c7 Boot Loader Version = BL9X 3.08.00.001
/c7 Serial Number = **********
/c7 PCB Version = Rev 041
/c7 PCHIP Version = 2.00
/c7 ACHIP Version = 1501290D
/c7 Controller Phys = 8
/c7 Connections = 7 of 128
/c7 Drives = 7 of 128
/c7 Units = 1 of 128
/c7 Active Drives = 6 of 128
/c7 Active Units = 1 of 32
/c7 Max Drives Per Unit = 32
/c7 Total Optimal Units = 0
/c7 Not Optimal Units = 1
/c7 Disk Spinup Policy = 1
/c7 Spinup Stagger Time Policy (sec) = 1
/c7 Auto-Carving Policy = off
/c7 Auto-Carving Size = 2048 GB
/c7 Auto-Rebuild Policy = on
/c7 Rebuild Rate = 1
/c7 Verify Rate = 1
/c7 Controller Bus Type = PCIe
/c7 Controller Bus Width = 8 lanes
/c7 Controller Bus Speed = 2.5 Gbps/lane
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-10 REBUILDING 32% - 64K 2095.44 ON ON
VPort Status Unit Size Type Phy Encl-Slot Model
------------------------------------------------------------------------------
p0 OK u0 698.63 GB SATA 0 - Hitachi HTS727575A9
p1 OK u0 698.63 GB SATA 4 - Hitachi HTS727575A9
p2 OK u0 698.63 GB SATA 1 - Hitachi HTS727575A9
p3 OK u0 698.63 GB SATA 2 - Hitachi HTS727575A9
p4 OK u0 698.63 GB SATA 3 - Hitachi HTS727575A9
p5 DEGRADED u0 698.63 GB SATA 5 - Hitachi HTS727575A9
p6 OK u? 698.63 GB SATA 6 - Hitachi HTS727575A9
*設定 [#zb23038a]
**アレイ管理 [#u095c36f]
***シングルドライブの作成 [#u5df0d26]
-書式
[コントローラ番号] add type=single disk=[ディスク番号] name=[アレイ名]
-入力例
# tw_cli
> /c5 add type=single disk=0 name=SINGLE01
Creating new unit on controller /c5 ... Done. The new unit is /c5/u1.
Naming unit /c5/u1 to [SINGLE01] ... Done.
Setting default Storsave policy to [balance] for the new unit ... Done.
Setting default Command Queuing policy for unit /c5/u1 to [on] ... Done.
Setting write cache = ON for the new unit ... Done.
Warning: You do not have a battery backup unit for /c5/u1 and the enabled
write cache (default) may cause data loss in the event of power failure.
***RAID1アレイの設定 [#p54ee423]
-書式
[コントローラ番号] add type=Raid1 disk=[ディスク番号]:[ディスク番号] autoverify name=[アレイ名]
-入力例
# tw_cli
> /c5 add type=Raid1 disk=1:2 autoverify name=RAID1
Creating new unit on controller /c5 ... Done. The new unit is /c5/u0.
Naming unit /c5/u0 to [RAID1] ... Done.
Setting AutoVerify=ON for the new unit ... Done.
Setting default Storsave policy to [balance] for the new unit ... Done.
Setting default Command Queuing policy for unit /c5/u0 to [on] ... Done.
Setting write cache = ON for the new unit ... Done.
Warning: You do not have a battery backup unit for /c5/u0 and the enabled
write cache (default) may cause data loss in the event of power failure.
***スペアディスクの設定 [#ka65ca06]
-書式
[コントローラ番号] add type=spare disk=[ディスク番号]
-入力例（コントローラ7にディスク7をスペアとして設定）
# tw_cli
> /c7 add type=spare disk=7
Creating new unit on controller /c7 ... Done. The new unit is /c7/u1.
WARNING: This Spare unit may replace failed drive of same interface type only.
-結果確認
> /c7 show
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-10 OK - - 64K 2095.44 ON ON
u1 SPARE OK - - - 698.629 - OFF
VPort Status Unit Size Type Phy Encl-Slot Model
------------------------------------------------------------------------------
p0 OK u0 698.63 GB SATA 0 - Hitachi HTS727575A9
p1 OK u0 698.63 GB SATA 4 - Hitachi HTS727575A9
p2 OK u0 698.63 GB SATA 1 - Hitachi HTS727575A9
p3 OK u0 698.63 GB SATA 2 - Hitachi HTS727575A9
p4 OK u0 698.63 GB SATA 3 - Hitachi HTS727575A9
p5 OK u0 698.63 GB SATA 5 - Hitachi HTS727575A9
p7 OK u1 698.63 GB SATA 6 - Hitachi HTS727575A9
***リビルドの実行 [#e6a953ee]
-書式
[コントローラ番号] start rebuild disk=[ディスク番号]
-入力例（コントローラ5にディスク0をユニット0に追加してリビルド）
# tw_cli
> /c5/u0 start rebuild disk=0
Sending rebuild start request to /c5/u0 on 1 disk(s) [0] ... Done.
**ディスク管理 [#c83e9e7f]
***ディスクの取り外し [#hd3d7b05]
-書式
/[コントローラ番号]/[ディスク番号] remove
-入力例
# tw_cli
> /c7/p6 remove
Removing /c7/p6 will take the disk offline.
Do you want to continue ? Y|N [N]: y
Removing port /c7/p6 ... Done.
***ドライブの検出 [#ea7c767a]
接続したHDDを検出する際の操作。
-書式
/[コントローラ番号] rescan
-入力例
# tw_cli
>/c5 rescan
Rescanning controller /c5 for units and drives ...Done.
Found the following unit(s): [none].
Found the following drive(s): [none].
