[[ネットワーク関連]]
目次~
#contents
*概要 [#p38c12db]
NEC製L2スイッチ「QX-S3109TP」の設定に関するメモ。~
**設定の保存 [#lf353ac5]
[QX-S3109TP] save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait............................
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.
*設定 [#k92b11ae]
**管理アドレス設定 [#p589e14d]
VLAN1へのアドレス設定。~
<QX-S3109TP> sys
[QX-S3109TP] interface Vlan-interface 1
[QX-S3109TP-Vlan-interface1] ip address 172.16.3.100 255.255.0.0
[QX-S3109TP-Vlan-interface1] quit
**SSH設定 [#ma0789aa]
SSH接続用設定。~
-ローカル鍵の生成
QX-S3109TP> sys
[QX-S3109TP] public-key local create rsa
-ユーザの作成
[QX-S3109TP] local-user admin
[QX-S3109TP-luser-admin] password simple [PASSWORD]
[QX-S3109TP-luser-admin] authorization-attribute level 3
[QX-S3109TP-luser-admin] service-type ssh telnet terminal
[QX-S3109TP-luser-admin] quit
-SSHサービスの起動
[QX-S3109TP] ssh server enable
[QX-S3109TP] ssh user admin service-type stelnet authentication-type password
[QX-S3109TP] user-interface vty 0 15
[QX-S3109TP-ui-vty0-15] authentication-mode scheme
[QX-S3109TP-ui-vty0-15] user privilege level 3
[QX-S3109TP-ui-vty0-15] idle-timeout 0 0
-SSHサービスの動作状況確認
[QX-S3109TP-ui-vty0-15]display ssh server status
SSH server: Enable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)
SSH server key generating interval : 0 hour(s)
SSH authentication retries : 3 time(s)
SFTP server: Disable
SFTP server Idle-Timeout: 10 minute(s)
**SNMP設定 [#hb37ef93]
-SNMP有効化
[QX-S3109TP] snmp-agent sys-info version v2c
[QX-S3109TP] snmp-agent community read [COMMNITY]
-SNMP設定表示
[QX-S3109TP] display snmp-agent sys-info
The contact person for this managed node:
NEC Corporation.
The physical location of this node:
asabiya.net
SNMP version running in the system:
SNMPv2c SNMPv3
-SNMP Trap有効化
[QX-S3109TP] snmp-agent trap enable
[QX-S3109TP] enable snmp trap updown
[QX-S3109TP] snmp-agent target-host trap address udp-domain [SERVER IP] params securityname localnet v2c
-SNMP Trap設定表示
[QX-S3109TP] display snmp-agent trap-list
arp trap enable
configuration trap enable
default-route trap enable
flash trap enable
standard trap enable
system trap enable
Enable traps: 6; Disable traps: 0
**LLDP設定 [#v1aaabae]
-LLDP有効化
<QX-S3109TP> sys
[QX-S3109TP] lldp enable
-隣接機器の表示
[QX-S3109TP] display lldp neighbor-information
LLDP neighbor-information of port 9[GigabitEthernet1/0/9]:
Neighbor index : 1
Update time : 0 days,0 hours,1 minutes,5 seconds
Chassis type : MAC address
Chassis ID : 7486-0bc9-6a00
Port ID type : Interface name
Port ID : Gi0/1
Port description : GigabitEthernet0/1
System name : Catalyst2960L-8TS-LL.asabiya.net
System description : Cisco IOS Software, C2960L Software (C2960L-UNIVERSALK9-M), Version 15.2(5)E2, RELEASE SOFTWARE (fc4)
System capabilities supported : Bridge,Router
System capabilities enabled : Bridge
Management address type : ipv4
Management address : 172.16.3.63
Management address interface type : SystemPortNumber
Management address interface ID : 1
Management address OID : 0
Port VLAN ID(PVID): 1
Auto-negotiation supported : Yes
Auto-negotiation enabled : Yes
OperMau : speed(1000)/duplex(Full)
**Syslog設定 [#cfe68b20]
-Syslog転送設定
[QX-S3109TP] info-center loghost [SYSLOG Server]
